SpiriTrap Paranormal Sensor V1

From the creator of SpiritVox, Echovox and Spirit Voice comes a new paranormal investigation tool. SpiriTrap is a sensor based application which uses your devices Magnetometer and Accelerometer sensors available on most devices. If your device does not have the required sensor it will not be available.

The idea is simple, use SpiriTrap in a doorway, room or hallway to detect footsteps or EMF fluctuations. It can also be used as an interaction device as the sensors are set to be VERY sensitive and it should be easily triggered by an energy source.

2 Modes, Silent and Alarm. Silent mode is just that, silent, no alarm will sound and it will monitor the area and write changes to a .txt log file with a time/date stamp. This means you can monitor an area for fluctuations for a long period of time unmanned.

When set to alarm mode an alarm will sound when the device is triggered. Again, think of all the uses for that.

UPON PRESSING "ARM" YOU HAVE 5 SECONDS TO LEAVE THE AREA.

This is a simple program for serious investigators. A great way to cover a hall, or use the time stamps to back up other evidence such as MEL spikes, footsteps etc.

I am planning adding more sensors such as static, light, and sound monitoring/auto record in version 2 when it's ready.

PLEASE NOTE: YOU MUST HAVE AT LEAST 1 OF THE 2 SENSORS MENTIONED ABOVE FOR THIS TO FUNCTION. MOST DEVICES HAVE AT LEAST 1.

ALSO: The sensors are VERY sensitive if you run into trouble with alarms tripping to easily please contact me atspiritvox@bigbeardaudio.comThis is a new idea and it will be growing as development and user feedback continue.

I fully support all my apps and am easy to reach. FOLLOW ME ON TWITTER: www.twitter.com/spiritvoxapp THAT IS THE BEST WAY TO REACH ME FOR SUPPORT.

I am a paranormal researcher, this is my life. I build these tools so we can find ANSWERS.

See my ghost hunting adventures at www.youtube.com/bigbeardaudio and my blog: spiritvox.bigbeardaudio.com

DEMO VIDEO IN PRODUCTION.Echovox和精神语音从创作者SpiritVox，出现了一种新的超自然的调查工具。 SpiriTrap是一种基于传感器的应用程序，使用设备的磁强计和加速度计传感器适用于大多数设备。如果您的设备不具备所需的传感器将无法使用。

我们的想法很简单，使用SpiriTrap在门口，室内或过道检测的脚步声或EMF波动的。它也可以用作传感器的交互装置被设置为是非常敏感的，并且它应该很容易地由一个能量源触发。

2模式，静音和报警。静音模式了这一点，沉默不语，没有报警声音，它会监视该地区和更改写入到文本日志文件的时间/日期戳。这意味着你可以监视区域的波动相当长的一段时间无人。

当设置为闹铃模式时会发出一个报警装置被触发。同样，认为所有的用途。

当按下“ARM”可以在5秒离开该地区。

这是一个简单的程序，进行认真的调查。一个伟大的方式来掩盖一个大厅，或使用备份的时间戳记其他证据，如MEL尖峰，脚步声等。

我打算增加更多的传感器，如静态，光，声监听/自动记录在第2版时，它的准备。

请注意：你必须至少有1个，2个传感器上面提到的这一切运转。大多数的设备至少有1。

：传感器是非常敏感的，如果你遇到了麻烦，报警跳闸容易请与我联系，在spiritvox@bigbeardaudio.com这是一个新的想法，它会越来越大，继续发展和用户反馈。

我完全支持我的所有的应用程序，很容易达到。按照我的Twitter：www.twitter.com / spiritvoxapp这是最好的方式来达到ME的支持。

我是一个超自然的研究员，这是我的生活。我建立了这些工具，以便我们可以找到答案。

我的鬼狩猎冒险在www.youtube.com / bigbeardaudio的，我博客：spiritvox.bigbeardaudio.com的

在生产中的演示视频。